João Goes | Engineering | Best Researcher Award

Published on by Global Scholar Awards

João Goes | Engineering | Best Researcher Award

João Goes , Universidade NOVA de Lisboa , Portugal

Dr. João Goes is a distinguished academic and industry professional in Electrical and Computer Engineering (ECE). He graduated from Instituto Superior Técnico (IST) in Lisbon in 1992 and obtained his M.Sc. and Ph.D. degrees from the Technical University of Lisbon in 1996 and 2000, respectively. In 2012, he earned the ‘Habilitation’ degree in Electronics from NOVA University of Lisbon (NOVA). Since 1998, Dr. Goes has been with the Department of Electrical and Computer Engineering (DEEC) at NOVA’s School of Sciences and Technology, where he is currently a Full Professor. He headed the DEEC from 2012 to 2019 and directed the Centre of Technology and Systems (CTS) at UNINOVA from 2012 to 2017. Since 2023, he has served as the Executive Director of UNINOVA. Dr. Goes has been a member of the Scientific Council of FCT NOVA for 12 years and is currently a member of the General Council of NOVA for the 2022-2025 term.

Publication profiles:

Education 

João Goes graduated in Electrical and Computer Engineering (ECE) from Instituto Superior Técnico (IST), Lisbon, in 1992. He obtained his M.Sc. in ECE from the Technical University of Lisbon in 1996, followed by a Ph.D. in ECE from the same institution in 2000. In 2012, he earned the ‘Habilitation’ degree in Electronics from NOVA University of Lisbon (NOVA).

Research focus

João Goes’ research focuses on analog and mixed-signal (AMS) integrated circuit design, with a special emphasis on sensor-to-digital and digital-to-actuator interfaces, data converters (ADCs and DACs), and high-performance analog frontends (AFEs). He has published over 200 papers in international journals and IEEE leading conferences, holds 4 international patents, and is co-author of 8 books. Notably, he is the Portuguese researcher with the most published papers in all IEEE flagship conferences requiring silicon-proven integrated circuits (ICs) with state-of-the-art performance, including ISSCC, VLSI, CICC, and ESSCIRC.

Experience

João Goes has had a distinguished career in academia and industry. Since 1998, he has been with the Department of Electrical and Computer Engineering (DEEC) at the School of Sciences and Technology of NOVA, where he is a Full Professor. From 2012 to 2019, he headed the DEEC, managing 50 professors and over 1000 students. Between 2012 and 2017, he was the Director of the Centre of Technology and Systems (CTS) at the Research Institute for New Technologies (UNINOVA), leading nearly 50 senior researchers with PhDs, over 70 collaborators, and more than 90 PhD students. Since 2023, he has been the Executive Director of UNINOVA.

Honors & Awards

João Goes has received numerous honors and awards throughout his career. Among several best-paper awards, he is the co-author of a journal paper that received the 2012 IEEE CASS Outstanding Young Author Award. He also co-won the first edition of the “Innovation Award INCM” in 2016. His contributions to science and engineering have been recognized internationally, showcasing his impact and leadership in the field of electrical and computer engineering

Publications Top Noted & Contributions
  • Cyber-physical systems security: A systematic review
    • Authors: Harkat, H., Camarinha-Matos, L.M., Goes, J., Ahmed, H.F.T.
    • Journal: Computers and Industrial Engineering
    • Year: 2024
    • Citations: 3
  • A PVT-Robust Open-loop Gm-Ratio ×16 Gain Residue Amplifier for >1 GS/s Pipelined ADCs
    • Authors: Dias, D., Goes, J., Costa, T.
    • Conference: Proceedings – IEEE International Symposium on Circuits and Systems
    • Year: 2024
    • Citations: 0
  • A Standard-Cell-Based Neuro-Inspired Integrate-and-Fire Analog-to-time Converter for Biological and Low-Frequency Signals – Comparison with Analog Version
    • Authors: Teixeira, M.L., Oliveira, J.P., Principe, J., Goes, J.
    • Journal: IEEE Transactions on Biomedical Circuits and Systems
    • Year: 2024
    • Citations: 0
  • IEEE SSCS-EDS ESSCIRC-ESSDERC 2023 [Conference Reports]
    • Authors: Goes, J., De La Rosa, J., Cathelin, A., De Oliveira, L.B., Paulino, N.
    • Journal: IEEE Solid-State Circuits Magazine
    • Year: 2024
    • Citations: 0
  • A Standard-Cell-Based Neuro-Inspired Integrate-and-Fire ATC for Biological and Low-Frequency Signals
    • Authors: Teixeira, M.L., Oliveira, J.P., Principe, J.C., Goes, J.
    • Conference: BioCAS 2023 – 2023 IEEE Biomedical Circuits and Systems Conference, Conference Proceedings
    • Year: 2023
    • Citations: 0
  • Design of an 20 GHz Wide-Band Input Buffer
    • Authors: Sebastião, D., Goes, J.
    • Conference: ICECS 2023 – 2023 30th IEEE International Conference on Electronics, Circuits and Systems
    • Year: 2023
    • Citations: 0
  • Chairs’ Message
    • Authors: Da Franca, J.E., Goes, J., De La Rosa, J.M., De Melo, J., Paulino, N.
    • Journal: European Solid-State Device Research Conference
    • Year: 2023
    • Citations: 0
  • ESSDERC 2023 Program
    • Authors: Da Franca, J.E., Goes, J., De La Rosa, J.M., De Melo, J., Paulino, N.
    • Journal: European Solid-State Device Research Conference
    • Year: 2023
    • Citations: 0
  • Chairs’ Message
    • Authors: Da Franca, J.E., Goes, J., De La Rosa, J.M., De Melo, J., Paulino, N.
    • Journal: European Solid-State Circuits Conference
    • Year: 2023
    • Citations: 0
  • Predictive Integrators with Thermal Noise Cancellation
    • Authors: Xavier, J., Leonardo, D., Barquinha, P., Goes, J.
    • Conference: Proceedings – IEEE International Symposium on Circuits and Systems
    • Year: 2023
    • Citations: 0

Sumit Kundu | Engineering | Best Researcher Award

Published on by Global Scholar Awards

Prof. Sumit Kundu | Engineering | Best Researcher Award

 Professor of NIT Durgapur, India

Prof. Sumit Kundu is a distinguished academic in the field of Electronics and Communication Engineering. He earned his Bachelor of Engineering (Hons) from National Institute of Technology, Durgapur, with a University Gold Medal 🏅 in 1991, followed by an M.Tech in Telecommunication Systems Engineering from IIT Kharagpur 📚 in 1993-94, and a Ph.D. in Wireless Communication from IIT Kharagpur 🎓 in 2004. Since 1995, he has been a Full-Time Professor at NIT Durgapur 👨‍🏫 and served as an Assistant Professor at IIT Kharagpur in 2007 🏫. With over 200 research papers published and contributions to several book chapters 📑, his research interests span Cooperative Communication, NOMA for 5G, Intelligent Reflecting Surfaces (IRS), Cognitive Radio Networks, Energy Harvesting in Wireless Networks, Physical Layer Security, and Wireless Sensor Networks 🔬. As a Senior Member of IEEE, Prof. Kundu also reviews for numerous IEEE and Elsevier journals and conferences 🏅📖.

Publication profile
Education

Prof. Sumit Kundu achieved his Bachelor of Engineering (Hons) in Electronics & Communication Engineering from National Institute of Technology, Durgapur in 1991, where he was honored with a University Gold Medal 🏅. He pursued further education at IIT Kharagpur, earning his Master of Technology (M.Tech) in Telecommunication Systems Engineering in 1993-94 📚. His academic journey culminated with a Ph.D. in Wireless Communication from IIT Kharagpur in 2004 🎓.

Research Skill

Prof. Sumit Kundu possesses exceptional research skills in the domain of Electronics and Communication Engineering 🔬. His expertise includes Cooperative Communication, NOMA for 5G, Intelligent Reflecting Surfaces (IRS), Cognitive Radio Networks, Energy Harvesting in Wireless Networks, Physical Layer Security, and Wireless Sensor Networks 🌐. With over 200 research papers published in international journals and conferences 📑, and contributions to several book chapters, his research is widely recognized for its innovation and impact. As a Senior Member of IEEE, he also serves as a reviewer for prominent IEEE and Elsevier journals and conferences 🏅📖.

Research Interest

Prof. Sumit Kundu has a diverse and impactful research portfolio in the field of Electronics and Communication Engineering 🌐. His interests include Cooperative Communication 🤝, NOMA for 5G 📶, and Intelligent Reflecting Surfaces (IRS) 🌟. He also explores Cognitive Radio Networks 🧠, Energy Harvesting in Wireless Networks 🔋, Physical Layer Security 🔒, and Wireless Sensor Networks 📡. These areas reflect his commitment to advancing communication technologies and addressing emerging challenges in the field.

Achievements

  • University Gold Medal for Bachelor of Engineering (Hons) 🏅
  • M.Tech in Telecommunication Systems Engineering from IIT Kharagpur 📚
  • Ph.D. in Wireless Communication from IIT Kharagpur 🎓
  • Full-Time Professor at NIT Durgapur since 1995 👨‍🏫
  • Assistant Professor at IIT Kharagpur in 2007 🏫
  • Supervised 12 Ph.D. students in Wireless Communication and Networking 🧑‍🎓
  • Published over 200 research papers in international journals and conferences 📑
  • Contributed to several book chapters 📚
  • Research focuses on Cooperative Communication, NOMA for 5G, IRS, Cognitive Radio Networks, Energy Harvesting, Physical Layer Security, and Wireless Sensor Networks 🔬
  • Senior Member of IEEE and reviewer for IEEE and Elsevier journals and conferences 🏅📖

 Projects 

  • Cooperative Communication Systems 🤝
  • Non-Orthogonal Multiple Access (NOMA) for 5G Networks 📶
  • Intelligent Reflecting Surfaces (IRS) for Enhanced Wireless Coverage 🌟
  • Cognitive Radio Networks for Spectrum Efficiency 🧠
  • Energy Harvesting Techniques in Wireless Networks 🔋
  • Physical Layer Security in Communication Systems 🔒
  • Wireless Sensor Networks for Smart Applications 📡

Publication top notes

1. Performance Analysis of NR 5G Cellular Vehicle to Everything Communication in Mode 3
Authors: Nayak, D.K., Singh, A., Reddy, S.R.V., Roy, S.D., Kundu, S.
Journal: Wireless Personal Communications
Year: 2024
Volume: 137(1)
Pages: 27–48
Citations: 0

2. Outage of Cooperative NOMA with an Energy Harvesting Relay in an Underlay Cognitive Radio Network
Authors: Ghosh, P., Dhar Roy, S., Kundu, S.
Journal: International Journal of Communication Systems
Year: 2024
Volume: 37(8)
Article ID: e5749
Citations: 0

3. Throughput and Delay Analysis of Cognitive M2M Communications
Authors: Mondal, S., Davoli, L., Dhar Roy, S., Ferrari, G., Raheli, R.
Journal: Journal of Network and Computer Applications
Year: 2024
Volume: 225
Article ID: 103856
Citations: 0

4. Outage and Ergodic Capacity Analysis of a Full-Duplex Energy-Harvesting Cooperative Non-Orthogonal Multiple Access Network
Authors: Baranwal, A., Dhar Roy, S., Kundu, S.
Journal: International Journal of Communication Systems
Year: 2024
Volume: 37(6)
Article ID: e5710
Citations: 0

5. On Performance of a Full Duplex SWIPT Enabled Cooperative NOMA Network
Authors: Baranwal, A., Sharma, S., Roy, S.D., Kundu, S.
Journal: Wireless Networks
Year: 2024
Volume: 30(3)
Pages: 1643–1656
Citations: 0

6. UAV-RIS Enabled NOMA Network for Disaster Management with Hardware Impairments
Authors: Ghosh, S., Bhowmick, A., Dhar Roy, S., Kundu, S.
Journal: IEEE Transactions on Aerospace and Electronic Systems
Year: 2024
Citations: 0

7. UAV-Assisted Multi-Hop D2D Relaying for Communication in Large Disaster Areas
Authors: Ghosh, S., Bhowmick, A., Roy, S.D., Kundu, S.
Journal: International Journal of Communication Systems
Year: 2023
Volume: 36(18)
Article ID: e5615
Citations: 0

8. An Analysis of D2D Network Modeling and Its Performance
Authors: Das, A., Ghosh, S., Nallagonda, S., Roy, S.D., Kundu, S.
Book: Digital Transformation: Modernization and Optimization of Wireless Networks
Year: 2023
Pages: 1–23
Citations: 0

9. Secrecy Outage of an Energy Harvesting Multi-Relay Network with Multiple-Antenna
Authors: Sharma, S., Roy, S.D., Kundu, S.
Journal: Wireless Personal Communications
Year: 2023
Volume: 129(4)
Pages: 2503–2524
Citations: 0

10. UAV Assisted SWIPT Enabled NOMA Based D2D Network for Disaster Management
Authors: Ghosh, S., Roy, S.D., Kundu, S.
Journal: Wireless Personal Communications
Year: 2023
Volume: 128(4)
Pages: 2341–2362
Citations: 5

Pydimarri Padmaja | Engineering | Excellence in Research

Published on by Global Scholar Awards

Pydimarri Padmaja | Engineering | Excellence in Research

Dr Pydimarri Padmaja, Teegala Krishna Reddy engineering college, India

Dr. Pydimarri Padmaja is a dedicated Professor at Teegala Krishna Reddy College of Engineering, specializing in Electronics and Communication Engineering (ECE). With a B.Tech from JNTU Kakinada and an M.Tech with Distinction from GEC Gudlavalleru, she earned her Ph.D. from SVUCE in 2019, focusing on Wireless Sensor Networks. Her thesis introduced advanced secure aggregation protocols to enhance data integrity. She has received multiple awards, including ‘Best Faculty’ and recognition as an ‘Innovative Researcher.’ Dr. Padmaja is also certified in Systems Maintenance Engineering and has attended numerous workshops and seminars on emerging technologies. 🏅🔬📚

Publication profile

Education

With a robust educational background, the individual completed their SSE at JNV, Pedavegi under CBSE in 1993 with 1st Class honors 🏆. They further pursued DEIE at Govt. Polytechnic SRLM with 1st Class and Distinction in 1996, specializing in Electronics and Instrumentation 📟. Their academic journey continued with a B.Tech in ECE from JNTU, Kakinada in 2004, achieving 2nd Class honors 🎓. They excelled in their M.Tech in DECS from GEC, Gudlavalleru in 2008 with 1st Class and Distinction 🎖️. They culminated their studies with a Ph.D. in Wireless Sensor Networks from SVUCE, SVU in 2019 📡.

Experience

Dr. Pydimarri Padmaja has had a distinguished academic career, starting as an Assistant Professor at Vignan Institute of Technology and Science, Deshmukhi, on May 5, 2007. Over the years, Dr. [Name] advanced to Associate Professor at the same institution, serving from August 12, 2013, to August 29, 2019. Currently, Dr. [Name] holds the position of Professor at Teegala Krishna Reddy College of Engineering, a role embraced since August 30, 2019, and continues to contribute to the field with dedication. 🎓📚🔬

Research focus

Dr. Pydimarri Padmaja’s research focuses on optimizing and securing wireless sensor networks (WSNs) and enhancing their efficiency. Her work includes energy-efficient data aggregation, malicious node detection, and secure data transmission in WSNs. She has explored techniques to circumvent jammers, optimize sensor network operations, and implement robust trust management in IoT systems. Dr. Padmaja’s research also extends to clinical studies, including the prevalence of endometrial tuberculosis in infertility cases. Her contributions to the field improve network reliability and data security, crucial for advancing modern communication systems. 🔍📡🔒

Publication top notes

Govind Rai Goyal | Engineering | Best Researcher Award

Published on by Global Scholar Awards

Dr. Govind Rai Goyal | Engineering | Best Researcher Award

Associate Professor of University of Engineering and Management Jaipur, India

Dr. Govind Rai Goyal is a distinguished academic and researcher in Electrical Engineering, specializing in Power Systems. With a Ph.D. from Kurukshetra University 🎓 and an M.E. from L.D. College of Engineering ⚡, he has a robust educational foundation. His journey in academia spans over 12 years 💼, marked by significant contributions at esteemed institutions such as ARYA Institute of Engineering & Technology, Vivekananda Global University, and University of Engineering & Management 🌍. Dr. Goyal is not only adept in teaching subjects like Circuit Analysis and Control Systems 📚 but also excels in research and technical skills, including MATLAB Programming and SPSS Statistics 💻. His dedication to excellence is reflected in his successful roles in NBA and NAAC accreditation processes 🌟.

Professional profile
Education📚

Dr. Govind Rai Goyal has a commendable educational background in Electrical Engineering 📚. He earned his Ph.D. in Electrical Engineering, specializing in Power Systems ⚡, from Kurukshetra University, completing his studies from April 2013 to December 2015 🎓. Prior to this, he obtained his M.E. in Electrical Engineering with a focus on Power Systems from L.D. College of Engineering, Ahmedabad, in 2012, achieving a remarkable 82% and securing the 2nd rank in the university 🏆. He also holds a B.E. in Electrical Engineering from the University of Rajasthan, Jaipur, where he graduated in 2008 with an impressive 88%, earning the 1st rank in his department 🥇. His academic journey is further distinguished by qualifying the GATE exam and receiving a scholarship from MHRD 🎖️.

Professional Experience🏛️

Dr. Govind Rai Goyal boasts a robust professional experience spanning over 12 years in the field of Electrical Engineering ⚙️. He began his career as a Lecturer at ARYA Institute of Engineering & Technology in Jaipur, where he served from July 2009 to June 2013, accumulating 4 years of teaching expertise 🎓. He then advanced to the role of Assistant Professor at Vivekananda Global University in Jaipur, contributing significantly from February 2016 to January 2021, a period of 5 years 📚. Following this, he held the position of Assistant Professor (Sr.) at the College of Engineering Roorkee from January 2021 to March 2022, gaining valuable experience over the course of a year 🏫. Most recently, he has been an Assistant Professor-III at the University of Engineering & Management in Jaipur from March 2022 to February 2024, before being promoted to Associate Professor in March 2024, where he continues to make impactful contributions 📘.

Research Interest🌐

Dr. Govind Rai Goyal’s research interests are rooted deeply in Electrical Engineering ⚡. His primary focus areas include Power Systems, Control Systems, and Circuit Analysis 🔌. He is particularly intrigued by the applications of Artificial Intelligence in Power Systems, aiming to integrate modern AI techniques to enhance the efficiency and reliability of electrical networks 🤖. Dr. Goyal also explores advanced simulation techniques and their practical applications in power system modeling, striving to push the boundaries of current technological capabilities 🌐. His dedication to these research domains is evident in his extensive academic and professional endeavors 📚.

Awards and Honors🏆

Dr. Govind Rai Goyal has received numerous awards and honors throughout his illustrious career 🌟. He was awarded his Ph.D. in Electrical Engineering with a specialization in Power Systems from Kurukshetra University in December 2016 🎓. Notably, he ranked 2nd in his university during his M.E. in Electrical Engineering at L.D. College of Engineering, Ahmedabad 🏅. Additionally, he qualified for the GATE exam and received a prestigious scholarship from MHRD 🏆. His consistent academic excellence was marked by achieving 1st rank in his department during his B.E. at the University of Rajasthan, Jaipur 🥇.

Research skill🔬

Dr. Govind Rai Goyal possesses a robust set of research skills that distinguish him in the field of Electrical Engineering, particularly in Power Systems ⚡. He is proficient in Microsoft Office, MATLAB Programming, SPSS Statistics, and LaTeX, enabling him to analyze data and present his findings effectively 📊. His expertise extends to Circuit Analysis & Synthesis, Control Systems, and Power System Analysis, both at the undergraduate and postgraduate levels 📚. Additionally, Dr. Goyal has demonstrated advanced simulation skills, making significant contributions to modern control systems and AI applications in power systems 🤖. His dedication to research and academic excellence is evident in his ability to handle complex technical challenges and deliver innovative solutions 💡.

Achievements🏅
  • 🎓 Ph.D. in Electrical Engineering (Power Systems) from Kurukshetra University (2024)
  • 🏅 Awarded M.E. in Electrical Engineering (Power System) from L.D. College of Engineering, Ahmedabad (2016) with 2nd rank in university
  • 📜 Qualified GATE Exam and received scholarship from MHRD
  • 🎓 B.E. in Electrical Engineering from the University of Rajasthan, Jaipur (2010) with 1st rank in department
  • 🏅 Successfully completed NBA accreditation as a core team member with A+ grade at AIET, Jaipur
  • 🏅 Worked in NAAC team and successfully completed accreditation with A+ grade at VGU, Jaipur
  • 🏅 Contributed to NAAC accreditation with B+ grade at COER, Roorkee
  • 💻 Proficient in Microsoft Office, MATLAB Programming, SPSS Statistics, and LaTeX
  • 📘 Published multiple research papers in renowned journals and conferences
  • 🏆 Recognized for outstanding contributions in teaching and research in the field of Electrical Engineering
Projects🛠️
    • 🔋 Energy Efficiency Project (2021-2022)
      • Developed a model for energy efficiency improvements in power systems.
      • Implemented advanced simulation techniques for optimizing energy use.
    • 🖥️ AI in Power Systems (2020-2021)
      • Explored applications of artificial intelligence in modern control systems.
      • Created algorithms for predictive maintenance and fault detection.
    • ⚡ Power System Analysis (2018-2019)
      • Conducted extensive circuit analysis and synthesis for power systems.
      • Led a team in modeling and simulation of complex electrical networks.
    • 🏭 Industrial Control Systems (2016-2017)
      • Developed control systems for industrial automation.
      • Integrated modern control theories with practical applications in industry.
    • 🧪 Advanced Simulation Lab (2015-2016)
      • Established and managed a state-of-the-art simulation lab for postgraduate students.
      • Provided hands-on training in MATLAB and other simulation software.
    • 📈 Circuit and Network Analysis (2014-2015)
      • Implemented teaching modules and laboratory setups for undergraduate courses.
      • Enhanced practical learning through innovative lab experiments and projects.
    • 🛠️ NBA Accreditation Project (2013-2014)
      • Core team member for NBA accreditation at AIET, Jaipur.
      • Achieved A+ grade by implementing stringent academic and administrative standards.
Publications📜
  • A Multi-objective PSO (MOPSO) Algorithm for Optimal Active Power Dispatch with Pollution Control
    • Authors: GD Sen, J Sharma, GR Goyal, AK Singh
    • Year: 2017
    • Citation: 30 📈
    • Published in: MATHEMATICAL MODELLING OF ENGINEERING PROBLEMS 4 (3), 132-137
  • Solution of Combined Economic Emission Dispatch with Demand Side Management Using Meta-heuristic Algorithms
    • Authors: GR Goyal, S Vadhera
    • Year: 2019
    • Citation: 20 📈
    • Published in: Journal Européen des Systèmes Automatisés 52 (2), 143-148
  • Multi-objective Optimal Active Power Dispatch Using Swarm Optimization Techniques
    • Authors: GR Goyal, HD Mehta
    • Year: 2015
    • Citation: 17 📈
    • Published in: Engineering (NUiCONE), 2015 5th Nirma University International Conference on …
  • Optimal Dispatch of Active and Reactive Power Using Cuckoo Search Method
    • Authors: GR Goyal, HD Mehta
    • Year: 2015
    • Citation: 16 📈
    • Published in: INTERNATIONAL JOURNAL OF INNOVATIVE RESEARCH IN ELECTRICAL, ELECTRONICS …
  • Multi-interval Programming Based Scheduling of Appliances with User Preferences and Dynamic Pricing in Residential Area
    • Authors: GR Goyal, S Vadhera
    • Year: 2021
    • Citation: 13 📈
    • Published in: Sustainable Energy, Grids and Networks 27, 100511
  • Challenges of Implementing Demand Side Management in Developing Countries
    • Authors: GR Goyal, S Vadhera
    • Year: 2020
    • Citation: 13 📈
    • Published in: Journal of Power Technologies 100 (1), 43
  • Contingency Ranking for Voltage Stability in Power System
    • Authors: F Hussian, GR Goyal, AK Arya, BP Soni
    • Year: 2021
    • Citation: 9 📈
    • Published in: 2021 IEEE International Conference on Electronics, Computing and …
  • Performance Study of Recent Swarm Optimization Techniques with Standard Test Functions
    • Authors: A Sharma, G Rai, M Jain, P Kumawat
    • Year: 2019
    • Citation: 9 📈
    • Published in: National Conference on Recent Advancements in Computational Mathematics and …
  • Comparative Study of Power Consumption Minimization in Analog Electronic Circuit Using AI Techniques
    • Authors: K Singhal, GR Goyal
    • Year: 2018
    • Citation: 8 📈
    • Published in: European Journal of Electrical Engineering 20 (4), 427
  • Optimal Setting of Parameters of Power System Controllers Using PSO Technique for Economic Load Dispatch
    • Authors: A Sharma, G Rai, M Jain, P Kumawat
    • Year: 2021
    • Citation: 6 📈
    • Published in: International Conference on Science and Computing (ICSC 2021)

Aghadadashi V | Mechanical Engineering Award | Best Researcher Award

Published on by Global Scholar Awards

Aghadadashi V | Mechanical Engineering Award | Best Researcher Award

Dr Aghadadashi V Iranian national Institute for Oceanography and Atmospheric Sciences, Iran 

He recently completed a postdoctoral course focusing on the burden of microplastics and plasticizers in surface sediments across the Persian Gulf and the Sea of Oman. During the course, he participated in an expedition to these areas, organized by the Iranian National Institute for Oceanography and Atmospheric Science. The experience equipped him with valuable skills in research planning, plasticizer analysis, and microplastic surveys in water and sediments. Additionally, he investigated the inventory and source of blue carbon in specific mangrove ecosystems along the Persian Gulf coast using stable isotopes and profiles of normal alkanes.

Education:

He pursued his academic journey with a strong focus on environmental science and marine pollution. Starting with a Bachelor of Science degree in Natural Resources, Fisheries, and Environment Science from the University of Tehran, he then proceeded to obtain a Master of Science in Environment Science from Tarbiat Modares University. His passion for marine pollution led him to pursue a Ph.D. at the Iranian National Institute of Oceanography and Atmospheric Sciences, where he specialized in environmental pollution, particularly marine pollution. Following his Ph.D., he continued his research journey as a Postdoctoral Fellow at the same institute, delving deeper into marine pollution issues. Throughout his academic and research career, he has demonstrated a commitment to understanding and addressing environmental challenges, particularly those related to marine ecosystems.

Experience:

Profiles:

Honors and Awards:

He achieved notable success in academic examinations, securing 11th place in the national master’s exam in 2017 and ranking 3rd in the nationwide doctoral exam of 2013. These achievements reflect his exceptional academic aptitude and dedication to his field of study.

Publications:

  1. Spatial distribution and vertical profile of heavy metals in marine sediments around Iran’s special economic energy zone; Arsenic as an enriched contaminant Cited By : 41, Published By : 2019
  2. Origin, distribution and toxicological potential of polycyclic aromatic hydrocarbons in surface sediments from the Bushehr coast, The Persian Gulf Cited By : 38, Published By : 2015
  3. Source, spatial distribution, and toxicity potential of Polycyclic Aromatic Hydrocarbons in sediments from Iran’s environmentally hot zones, the Persian Gulf Cited By : 33, Published By : 2019
  4. Origin, toxicological and narcotic potential of sedimentary PAHs and remarkable even/odd n-alkane predominance in Bushehr Peninsula, the Persian Gulf Cited By : 26, Published By : 2017
  5. Using GIS, geostatistics and Fuzzy logic to study spatial structure of sedimentary total PAHs and potential eco-risks; An Eastern Persian Gulf case study Cited By : 18, Published By : 2019
  6. Sediment-associated polycyclic aromatic hydrocarbons and potential eco-hazards in Chabahar Bay, Iran Cited By : 15, Published By : 2018
  7. Normal alkanes in sediments from the Persian Gulf: spatial pattern and implications for autochthonous, allochthonous, and petroleum-originated contaminants Cited By : 12, Published By : 2021
  8. Occurrence, spatial deposition and footprint of polybrominated diphenyl ethers in surficial sediments of Bushehr peninsula, the Persian Gulf Cited By : 8, Published By : 2016
  9. Combining theoretical concepts and Geographic Information System (GIS) to highlight source, risk, and hotspots of sedimentary PAHs: A case study of Chabahar Bay Cited By : 4, Published By : 2023
  10. Sediment Characteristics and Estimation of Toxicity Site Specific Criteria for Sediments of Iranian Coasts, The Persian Gulf Cited By : 2, Published By : 2022

Swarnadipto Ghosh | Engineering | Best Researcher Award

Published on by Global Scholar Awards

🌟Mr. Swarnadipto Ghosh, Engineering, Best Researcher Award 🏆

  • Swarnadipto Ghosh at Indian Institute of Space Science and Technology, India

Swarnadipto Ghosh is a dedicated researcher and engineer specializing in RF and Microwave Engineering. With a background in Electronics and Communication Engineering, Swarnadipto has pursued advanced studies at the Indian Institute of Space Science and Technology (IIST), Trivandrum, where he is currently completing his M.Tech in RF and Microwave Engineering. He has a keen interest in metamaterials, computational electromagnetics, and antenna design for applications such as satellite communication and 5G technology. Swarnadipto is proficient in software tools like Ansys HFSS, MATLAB, and programming languages like C and Python. Alongside his academic pursuits, Swarnadipto is an active member of IEEE Microwave Theory & Technology Society (MTT-S) and enjoys hobbies such as singing and cricket.

Author Metrics

Google Scholar Profile

Scopus Profile

Swarnadipto’s research output is characterized by a high level of quality and impact. His publications have been well-received within the academic community, as evidenced by citations and acknowledgments from peers in the field.

Swarnadipto Ghosh. He is affiliated with Dream Institute of Technology in Kolkata, India. Based on the provided data, he has 9 documents indexed in Scopus, with a total of 3 citations since 2019. His h-index is 1, indicating that he has at least 1 publication that has been cited at least once. His i10-index, which measures the number of publications with at least 10 citations, is currently 0.

Education

Swarnadipto Ghosh holds a Bachelor’s degree in Electronics and Communication Engineering from Dream Institute of Technology (DIT), Kolkata. Currently, he is pursuing a Master’s degree in RF and Microwave Engineering at the Indian Institute of Space Science and Technology (IIST), Trivandrum.

Research Focus

Swarnadipto’s research interests revolve around various aspects of RF and Microwave Engineering, with a particular focus on metamaterials, electromagnetic bandgap structures, computational electromagnetics, and ultra-wideband antennas. He is dedicated to exploring applications such as 5G technology, beamforming, and satellite communication.

Professional Journey

Swarnadipto has embarked on a promising professional journey, starting with an internship at Bharat Sanchar Nigam Limited (BSNL) as a Summer Trainee. He has since been involved in numerous research projects at IIST, Trivandrum, focusing on antenna design, mathematical modeling of metamaterials, and impedance modulation for various applications.

Honors & Awards

Swarnadipto Ghosh has been recognized for his academic excellence with a Graduate Aptitude Test in Engineering (GATE) Scholarship from the Ministry of Education (MoE). He has also received accolades for his research contributions, including publications in reputable conferences and journals.

Publications Noted & Contributions

Swarnadipto has made significant contributions to the field of RF and Microwave Engineering through his publications. His work encompasses a wide range of topics, including antenna design, metamaterials, and computational electromagnetics. His research papers have been accepted and presented at prestigious conferences and published in renowned journals.

  1. Design and Analysis of mm-Wave MIMO SIW Antenna for Multibeam 5G Applications
    • Cited By: 1
    • Year: 2023
  2. Hybrid Wireless RF-Perovskite Photovoltaic Energy Harvester Design Consideration for Low-Power Internet of Things
    • Cited By: 1
    • Year: 2023
  3. Gap-coupled resonator loaded ultra-wideband filtenna for frequency-notching applications
    • Cited By: 1
    • Year: 2023
  4. Systematic Analysis of Rotated Dual-Split Elliptical SRR with Band-Stop Characteristics
    • Cited By: Not specified
    • Year: 2023
  5. Statistically distributed 1D sinusoidally modulated leaky wave antenna for beam-scanning application
    • Cited By: Not specified
    • Year: 2023

Research Timeline

Swarnadipto’s research journey has been marked by continuous growth and exploration. From his early undergraduate studies to his current pursuit of a Master’s degree, he has consistently delved deeper into the realm of RF and Microwave Engineering, contributing valuable insights and innovations along the way.

Uttam Acharya | Mechanical Engineering | Best Researcher Award

Published on by Global Scholar Awards

🌟Assist Prof Dr. Uttam Acharya, Mechanical Engineering, Best Researcher Award🏆

 Assistant Professor at Amity University Kolkata, India

Dr. Uttam Acharya is a dedicated and versatile professional with a strong background in Mechanical Engineering. Known for his integrity, diligence, and teamwork, Uttam excels under pressure and is committed to continuous growth. His passion lies in the field of materials science and manufacturing processes, where he has made significant contributions through his research and academic endeavors. Uttam’s career is marked by a relentless pursuit of excellence and a commitment to pushing the boundaries of knowledge in his field.

Author Metrics:

Dr. Uttam Acharya is a researcher affiliated with Amity University Kolkata, India. His unique identification number in the Scopus database is 57204654683. Scopus is a comprehensive database of scholarly literature, and each author is assigned a unique identifier to distinguish their work and track their publications, citations, and other metrics.

Orcid Profile

Scopus Profile

Google Scholar Profile

According to Scopus, Dr. Acharya’s research has been cited a total of 198 times across 24 documents indexed in the database. The h-index, a measure of both the productivity and citation impact of a researcher’s publications, is 9 for Dr. Acharya. This means that he has published 9 papers that have each been cited at least 9 times.

Education:

Dr. Acharya holds a Ph.D. in Mechanical Engineering from NIT Agartala, specializing in joining of metals and composite materials. His M.Tech focused on Materials & Manufacturing Technology from NIT Silchar, further solidifying his expertise in the field. Uttam’s educational journey reflects his dedication to advancing his knowledge and skills in mechanical engineering, laying a strong foundation for his research and professional career.

Research Focus:

Uttam’s research interests span a wide range of topics within mechanical engineering, including joining of metals, composite materials, manufacturing processes, material science, and non-traditional machining. His work primarily revolves around improving the mechanical properties and performance of materials, with a focus on innovative techniques such as friction stir welding and additive manufacturing.

Professional Journey:

Dr. Acharya has garnered valuable experience as an Assistant Professor at Amity School of Engineering and Technology Kolkata, where he has been actively involved in teaching, research, and academic leadership. Prior to this, he served as a contractual Assistant Professor at the National Institute of Technology Silchar. Throughout his career, Uttam has demonstrated a strong commitment to academic excellence and has mentored numerous students in their research endeavors.

Honors & Awards:

Uttam’s contributions to the field of mechanical engineering have been recognized with prestigious awards such as the “Young Scientist Award” at the International Scientist Awards on Engineering, Science, and Medicine. His dedication and achievements have earned him accolades within the academic community, highlighting his impact and leadership in the field.

Publications Top Noted & Contributions:

Dr. Acharya has authored a significant number of peer-reviewed publications in esteemed journals and conference proceedings, focusing on topics ranging from friction stir welding to additive manufacturing. His research contributions have advanced the understanding of materials behavior and processing techniques, contributing to the body of knowledge in mechanical engineering.

“Determination of best tool geometry for friction stir welding of AA 6061-T6 using hybrid PCA-TOPSIS optimization method”

  • Authors: A. Banik, A. Saha, JD. Barma, U. Acharya, SC. Saha
  • Published in: Measurement, 2021
  • Summary: This paper likely discusses the optimization of tool geometry for friction stir welding of AA 6061-T6 aluminum alloy using a hybrid approach involving Principal Component Analysis (PCA) and Technique for Order Preference by Similarity to Ideal Solution (TOPSIS) method.

“Torque and force perspectives on particle size and its effect on the mechanical property of friction stir welded AA6092/17.5 SiCp-T6 composite joints”

  • Authors: U. Acharya, BS. Roy, SC. Saha
  • Published in: Journal of Manufacturing Processes, 2019
  • Summary: This paper explores the relationship between torque, force, particle size, and mechanical properties in friction stir welded joints of AA6092/17.5 SiCp-T6 composite.

“Effect of tool rotational speed on the particle distribution in friction stir welding of AA6092/17.5 SiCp-T6 composite plates and its consequences on the mechanical property”

  • Authors: U. Acharya, BS. Roy, SC. Saha
  • Published in: Defence Technology, 2020
  • Summary: This paper investigates how tool rotational speed affects particle distribution in friction stir welding of AA6092/17.5 SiCp-T6 composite plates and its impact on mechanical properties.

“On the role of tool tilt angle on friction stir welding of aluminum matrix composites”

  • Authors: U. Acharya, BS. Roy, SC. Saha
  • Published in: Silicon, 2021
  • Summary: This paper likely discusses the influence of tool tilt angle on the FSW process of aluminum matrix composites.

“Effect of traverse speed on microstructure and mechanical properties of friction-stir-welded third-generation Al–Li alloy”

  • Authors: SCS. Sanjeev Kumar, U. Acharya, D. Sethi, T. Medhi, B. (Authors’ last name not provided in the citation)
  • Published in: Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2020
  • Summary: This paper explores the impact of traverse speed on microstructure and mechanical properties of friction-stir-welded third-generation Al–Li alloy.

Research Timeline:

Dr. Acharya’s research journey is characterized by a continuous pursuit of knowledge and innovation. Starting from his educational pursuits, Uttam has seamlessly transitioned into a successful academic and researcher, consistently pushing the boundaries of knowledge in mechanical engineering. His research timeline showcases a progressive trajectory, with each publication and contribution contributing to the advancement of his field.

Indra jeet singh | Mechanical Engineering | Best Researcher Award

Published on by Global Scholar Awards

🌟Dr. Indra jeet singh, Mechanical Engineering, Best Researcher Award 🏆

 Doctorate at Delhi Technological University, Department of Mechanical Engineering, India

Professional Profiles:

Orcid Profile

Bio Summary: Indrajeet Singh is a dedicated professional currently enrolled in a Ph.D. program in Mechanical Engineering at Delhi Technological University, where he collaborates with Dr. Qasim Murtaza and Dr. Paras Kumar on ongoing research. With a solid academic foundation, including a Master’s degree in Automobile Engineering from Galgotias University and a Bachelor’s degree in Mechanical Engineering from GBIT Meerut, UP, Indrajeet has demonstrated academic excellence throughout his educational journey. He has also actively contributed to the academic community as a Teaching Assistant at Delhi Technological University since December 2018, aiming to nurture the growth of young minds and promote a scientific temperament.

Education:

Ph.D. in Mechanical Engineering

Delhi Technological University, Pursuing (Enrollment: 2018)

Research under Dr. Qasim Murtaza and Dr. Paras Kumar

M. Tech in Automobile Engineering

Galgotias University, 2018

CGPA: 8.68

B. Tech in Mechanical Engineering

GBIT Meerut, UP, U.P.T.U, 2014

Percentage: 62.86%

XII / Intermediate in Science (PCM)

Government Inter College, Etah, UP, UP Board, 2006

Percentage: 72.8%

X / High School in Science

Etah Public School, Etah, UP, UP Board, 2004

Percentage: 67.6%

Research Focus:

Specialization: Mechanical Engineering

Professional Journey:

Currently working as a Teaching Assistant (TA) at Delhi Technological University since December 2018.

Contributing to the growth of young learners and the country’s scientific temperament.

Research Timeline:

Ph.D. Enrollment: December 2018 (Ongoing)

Publications Top Noted & Contributions:

Title: An overview of cold metal transfer welding of similar materials

Publication Venue: International Journal on Interactive Design and Manufacturing (IJIDeM)

Date of Publication: January 24, 2024

Type: Journal Article

DOI: 10.1007/s12008-023-01719-5

Source: Crossref

Peer Review:

Review Activity: Materials Science & Engineering (1)

Record Last Modified: January 29, 2024, 3:15:41 PM

 

Ahmed Rezk | Mechanical Engineering | Excellence in Research

Published on by Global Scholar Awards

🌟 Dr. Ahmed Rezk, Mechanical Engineering, Excellence in Research 🏆

Doctorate at Aston University, United Kingdom

Professional Profiles:

Bio Summary:

Ahmed Rezk is a distinguished Senior Lecturer (Associate Professor) specializing in thermal-fluid sciences. With a strong academic background and a commitment to sustainable solutions, he holds a Ph.D. in Mechanical Engineering and serves as a Program Director for MSc Future Vehicle Technologies at Aston University, Birmingham. Ahmed is recognized for his impactful contributions to research in sustainable cooling and heating, thermal energy storage, and thermal water treatment.

Experience:

Senior Lecturer at Aston University, Birmingham

  • Leads research on sustainable cooling and heating, and thermal energy storage technologies
  • Program director of MSc Future Vehicle Technologies
  • Member of the College Curriculum Development Committee

Lecturer at Aston University, Birmingham

  • Principle investigator of sustainable cooling and heating and thermal energy storage
  • Mechanical Engineering Admission tutor and First Year tutor

Research Fellow at the School of Computing and Engineering, University of Huddersfield

  • Managed research on turbocharger electrification, including engine modeling and 3D CFD turbine modeling
  • Advised the group’s PhD researchers

Assistant Professor at Alexandria University, Egypt

  • Led, taught, and assessed Thermal-Fluid Sciences for different year groups

Teaching Assistant at the School of Mechanical Engineering, University of Birmingham, UK

  • Teaching Assistant at Alexandria University, Egypt

Membership and International Recognition:

Senior Fellow of Higher Education Academy (SFHEA)

Chartered Engineer (CEng)

Member of the Institute of Mechanical Engineers (MI-MechE)

Member of Academic Assessment Committee (AAC-IMechE)

Member of Sustainable Innovation in Refrigeration and Air Conditioning and Heating Group (SIRACH)

Education:

PGCert in L&T for higher education

Ph.D. in Mechanical Engineering, Aston University, UK

MSc in Mechanical Engineering, University of Birmingham, UK

BSc in Mechanical Engineering, Alexandria University, Egypt

Research Focus:

Ahmed’s research concentrates on sustainable cooling and heating technologies, thermal energy storage, and thermal water treatment. His work encompasses areas such as adsorption refrigeration, energy-powered systems, and the integration of innovative materials for enhanced heat transfer.

Professional Journey:

Senior Lecturer (Associate Professor), Aston University, Birmingham

Lecturer (Assistant Professor), Aston University, Birmingham

Research Fellow, School of Computing and Engineering, University of Huddersfield

Assistant Professor, Mechanical Engineering, Alexandria University, Egypt

Teaching Assistant, School of Mechanical Engineering, University of Birmingham, UK

Honors & Awards:

Fully funded Ph.D. scholarship, University of Birmingham

Guest Keen and Nettlefolds Scholarship award for best publication in the college (£1,000)

Publications Top Noted & Contributions:

Ahmed Rezk has made significant contributions to the field, with numerous journal papers and conference presentations. Notable publications include research on ionic liquid/graphene composites, techno-economic optimization of organic Rankine cycle configurations, and investigations into various adsorption systems for cooling and water desalination.

Preparation and assessment of ionic liquid and few-layered graphene composites to enhance heat and mass transfer in adsorption cooling and desalination systems

    • Authors: H Banda, TH Rupam, A Rezk, Z Visak, J Hammerton, Q Yuan, BB Saha
    • Journal: International Journal of Heat and Mass Transfer
    • Year: 2024
    • Summary: This publication explores the preparation and evaluation of composites involving ionic liquid and few-layered graphene. The focus is on enhancing heat and mass transfer in adsorption cooling and desalination systems, contributing to advancements in sustainable energy technologies.

Productivity and Thermal Performance Enhancements of Hollow Fiber Water Gap Membrane Distillation Modules Using Helical Fiber Configuration: 3D Computational Fluid Dynamics …

    • Authors: MO Elbessomy, MB Elsheniti, SM Elsherbiny, A Rezk, OA Elsamni
    • Journal: Membranes
    • Year: 2023
    • Summary: This work investigates enhancements in productivity and thermal performance of hollow fiber water gap membrane distillation modules. The study utilizes a helical fiber configuration and employs 3D Computational Fluid Dynamics for a comprehensive analysis.

Intensifies the sorption capacity and thermal performance of adsorption systems for cooling and heat storage

    • Author: A Rezk
    • Institution: Interdisciplinary Graduate School of Engineering Sciences, Kyushu University
    • Year: 2023
    • Summary: This publication, authored by Ahmed Rezk, focuses on intensifying the sorption capacity and thermal performance of adsorption systems. The study contributes to the understanding and improvement of cooling and heat storage technologies.

Investigation of the Mechanical and Tribological Behavior of Epoxy-Based Hybrid Composite

    • Authors: T Albahkali, A Fouly, IA Alnaser, MB Elsheniti, A Rezk, HS Abdo
    • Journal: Polymers
    • Year: 2023
    • Summary: This research delves into the investigation of the mechanical and tribological behavior of an epoxy-based hybrid composite. The study explores the properties and performance of the composite material, contributing to advancements in materials science.

Multi-objective optimisation of MOF-801 adsorbent packed into copper foamed bed for cooling and water desalination systems

    • Authors: M Rezk, MB Elsheniti, A Rezk, OA Elsamni
    • Journal: Applied Thermal Engineering
    • Year: 2023
    • Summary: The publication focuses on the multi-objective optimization of MOF-801 adsorbent packed into a copper foamed bed. The study aims to enhance the efficiency of cooling and water desalination systems, addressing multiple objectives in the optimization process.

Author Metrics:

Citations: 734

Documents: 35

h-index: 12

Research Timeline:

2015-2019: Investigated the potential use of graphene to intensify the heat transfer performance of adsorption systems.

2020-2022: Led projects on solar-driven precoolers for post-harvesting food preservation and off-grid modular cold rooms in Ethiopia.

2023: Secured grants for projects such as CoolRun Malawi and sustainable modular desiccant food dryers in collaboration with the University of Cape Coast, Ghana.